GSOC Controller Multifunctional Radio
Controller 7″ Touch Screen Perfect For XIEGU G90S/G90/X5105
Features:
– 7″ touch screen, USB interface, and slot for TF card.
– GSOC uses dual-core CPU (A20) for ARM Cortex-A7 as its main CPU, equipped with 4GB for eMMC and 1GB RAM. At the same time, a built-in MCU for Cortex-M3 for I/O control is used to handle tasks such as buttons and encoders.
– Two built-in sound cards, one is 24bit/192ksps, the other is 8 to 32bit/8 to 48ksps, both have stereo function, easy to handle digital mode
(encoding/decoding in I/Q domain or audio domain).
– The main knob adopts 64-PPR optical encoder.
– Built-in ultra-low noise isolated power supply.
– After wiring, it can realize control, frequency spectrum, waterfall graph, data encoding and decoding terminal.
– GSOC general data terminal is suitable for XIEGU X5105, G90S/G90, compatible with the next generation host. Built-in a baseband receiver and a frequency conversion receiver. It can receive IQ baseband signal, can also receive a certain range
of intermediate frequency signal, used to adapt to the output of different radio stations. When used together, use a dedicated
communication protocol, but you can use a USB-to-Serial cable to configure it as a CI-V controller.
– Advanced functions: Digital function NR, etc., 200k bandwidth spectrum, waterfall chart, voice call, preset telegram, amateur
data communication, encoding and decoding.
– Photoelectric knob operates at high speed. GSOC real-time area open source, you can develop more functions.
– High playability: Not only supports full-screen touch, but also an external mouse and keyboard, making complex operations simple.
Product Parameters:
– Dimensions: 225*123*45mm (excluding sizes of protrusions)
– DSP parameters: 24bit ADC, 200kHz spectrum and waterfall chart bandwidth
– Standard support: NFM/AM/USB/LSB/CW
– Screen size and resolution: 7 inches, 1024×600 pixels, full color
– Screen touch: capacitive sensing
– Frequency knob: photoelectric high precision induction type
– Voltage range: 10.5-16.5V
– Supported models: G90S/G90/X5105 (support more models in the future)
– Communication interface: 9-pin and [I/Q 3.5mm] and [IF MCX] etc.
– Microphone interface: LAN RJ45 standard 8-pin
– Speaker interface: 3.5 mm
– Net weight: 1.2kg
Package Included:
– 1 x GSOC Controller
– 1 x Power Cable
– 1 x I/Q Audio Connection Cable
– 1 x DB9 Data Control Cable
– 1 x Operation Manual
Note:
– TF card and other items are not included.
Startup: press the On/Off button. The equipment will starts up after about 20 seconds.
Shutdown: keep pressing the On/Off button for 5 seconds
Operating mode:
Touch: pressing the corresponding display area on the screen, the corresponding function
operation or menu will pop up.
Mouse: both the wired mouse and wireless mouse can be used. The mouse can be used
after the USB is inserted into the left USB port. The corresponding functions can be
operated by clicking the corresponding display area with the mouse. Some icons are
small in size, so it is recommended to operate with a mouse.
Frequency and Frequency Band Operation
When you touch the MHz bit frequency, the frequency band selection menu will pop up.
After selecting the corresponding frequency band, press the exit button to return to the
standby interface. In this interface, you can also operate PRE, ATT, MODE, SPLT and
AGC functions.
TS Step-by-Step Selection
Touch or click the corresponding frequency bit to select it as the current TS bit, and turn
the big wheel or mouse wheel to adjust.
Multifunction Knob at the Top
Left knob: filter center modebandwidth mode selection. Turn the outer knob and inner
knob to jointly adjust the filter parameters.
Right knob: Currently, only the volume adjustment function of the inner knob is enabled.
The function of three customized buttons is not enabled.
Multifunction Menu at the Bottom
1.
SCOPE
SPAN: spectrum bandwidth selection
LEVEL: level selection
DISP: spectrum color custom settings
2.
RADIO
MODEM: interface of modulator-demodulator
T/R EQ: transfer and receive EQ settings
DSP: digital signal processing function setting. The items to be adjusted can be selected
in the menu. Continuously clicking an item, you can switch multiple adjustment items of
the item.
SYSTEM: system setting. The operation method is the same as above.
*Note that to exit the menu, you shall click the exit button in the menu.
Wiring Method of the Host and GSOC
Power supply: Whether it is connected to G90 or X5105, an external power supply is
required to power the GSOC separately. The host is unable to provide sufficient power.
Supply voltage range: 11~14V DC
The external DC power port is on the right side.
Hand microphone: Insert it into the hand microphone port on the right side.
IF signal: Connect it to the IF input port on the right side
Left side: Provide two USB ports and TF card socket
Back side:
REMOTE: It is used to connect G90/G90S host
SP/PH: earphone speaker shared port. (Do not connect the earphone for now because the
volume will be loud)
I/Q: to connect the IQ signal output by the G90 host.
Reviews
There are no reviews yet.